In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/Arduino.h:30,
                 from F:\arduino_project\KVANT_DUE_1.1.1\Protocentral_ADS1220.cpp:22:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/Arduino.h:30,
                 from C:\Users\vadim\AppData\Local\Temp\arduino_build_290524\sketch\KVANT_DUE_1.1.1.ino.cpp:1:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
In file included from F:\arduino_project\KVANT_DUE_1.1.1\Protocentral_ADS1220.cpp:23:0:
F:\arduino_project\KVANT_DUE_1.1.1\Protocentral_ADS1220.h:80:0: warning: "_BV" redefined
 #define _BV(bit) (1<<(bit))
 
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/Arduino.h:30:0,
                 from F:\arduino_project\KVANT_DUE_1.1.1\Protocentral_ADS1220.cpp:22:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:101:0: note: this is the location of the previous definition
 #define _BV(bit) (1 << (bit))
 
In file included from F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:17:0:
F:\arduino_project\KVANT_DUE_1.1.1\Protocentral_ADS1220.h:80:0: warning: "_BV" redefined
 #define _BV(bit) (1<<(bit))
 
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/Arduino.h:30:0,
                 from C:\Users\vadim\AppData\Local\Temp\arduino_build_290524\sketch\KVANT_DUE_1.1.1.ino.cpp:1:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:101:0: note: this is the location of the previous definition
 #define _BV(bit) (1 << (bit))
 
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:123:0: warning: "MENU_size" redefined
 #define MENU_size 9
 
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:430:0: note: this is the location of the previous definition
  #define MENU_size 3
 
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: In function 'void loop()':
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:176:12: warning: unused variable 'Tic' [-Wunused-variable]
 static int Tic=0;
            ^~~
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: In function 'void profile_select()':
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:371:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 };
 ^
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:371:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:371:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:371:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: In function 'void GAIN()':
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:439:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 };
 ^
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:439:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:439:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:439:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino: In function 'void Menu()':
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
 };
 ^
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:138:1: warning: ISO C++ forbids converting a string constant to 'char*' [-Wwrite-strings]
F:\arduino_project\KVANT_DUE_1.1.1\FILTERS.ino: In function 'void Filter_select()':
F:\arduino_project\KVANT_DUE_1.1.1\FILTERS.ino:246:6: warning: unused variable 'Tic' [-Wunused-variable]
  int Tic=0;
      ^~~
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino: In function 'void s_fun()':
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino:72:18: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
     for(int i=0;i<SAMPLES_Sound;i++)Sound_val[i]=val_s[i];
                  ^
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino: In function 'void snd_OFF()':
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino:108:14: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 for(int i=0;i<SAMPLES_Sound;i++)Sound_val[i]=zero;
              ^
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino: In function 'void Go_Sound(int, float)':
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino:119:15: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
  for(int i=0;i<SAMPLES_Sound;i++)val_s[i]=zero+map(int(Piano[i]),-127,127,(lev/2)*-1,lev/2);
               ^
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino: In function 'void test_sound(int)':
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino:185:25: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
 if(mode==1)for(int i=0;i<(sizeof(sound_test)/4);i++) BEEP(sound_test[i]);
                        ~^~~~~~~~~~~~~~~~~~~~~~~
F:\arduino_project\KVANT_DUE_1.1.1\EEPROM_R_W.ino: In instantiation of 'int EEPROM_write(int, const T&, int) [with T = strMem]':
F:\arduino_project\KVANT_DUE_1.1.1\BUTTON.ino:82:61:   required from here
F:\arduino_project\KVANT_DUE_1.1.1\EEPROM_R_W.ino:12:7: warning: value computed is not used [-Wunused-value]
       *p++;
       ^
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: In function 'int ADC_Read_Data(bool)':
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:256:1: warning: control reaches end of non-void function [-Wreturn-type]
 }
 ^
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino: In function 'int VDI_TONE(int, float)':
F:\arduino_project\KVANT_DUE_1.1.1\SOUND.ino:103:1: warning: control reaches end of non-void function [-Wreturn-type]
 }
 ^
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: At global scope:
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:176:12: warning: 'Tic' defined but not used [-Wunused-variable]
 static int Tic=0;
            ^~~
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino: In function 'void F_scan()':
F:\arduino_project\KVANT_DUE_1.1.1\KVANT_DUE_1.1.1.ino:510:22: warning: 'mem_i' may be used uninitialized in this function [-Wmaybe-uninitialized]
    Mem.F_TX[Mem.Prof]=mem_i;
    ~~~~~~~~~~~~~~~~~~^~~~~~
Compiling libraries...
Compiling library "Wire"
"C:\\Users\\vadim\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -c -g -Os -Wall -Wextra -DDEBUG_LEVEL=DEBUG_ALL -std=gnu++11 -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8002000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10815 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DSERIAL_USB -DGENERIC_BOOTLOADER -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/stm32f1/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/stm32f1" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/usb_lib" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\cores\\maple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\SPI\\src" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\utility" "C:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\Wire.cpp" -o "C:\\Users\\vadim\\AppData\\Local\\Temp\\arduino_build_290524\\libraries\\Wire\\Wire.cpp.o"
"C:\\Users\\vadim\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -c -g -Os -Wall -Wextra -DDEBUG_LEVEL=DEBUG_ALL -std=gnu++11 -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8002000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10815 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DSERIAL_USB -DGENERIC_BOOTLOADER -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/stm32f1/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/stm32f1" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/usb_lib" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\cores\\maple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\SPI\\src" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\utility" "C:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\SoftWire.cpp" -o "C:\\Users\\vadim\\AppData\\Local\\Temp\\arduino_build_290524\\libraries\\Wire\\SoftWire.cpp.o"
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\utility/WireBase.h:44,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.h:42,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.cpp:39:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\utility/WireBase.h:44,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\SoftWire.h:43,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\SoftWire.cpp:47:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.cpp: In member function 'virtual uint8 TwoWire::process(uint8)':
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.cpp:41:30: warning: unused parameter 'stop' [-Wunused-parameter]
 uint8 TwoWire::process(uint8 stop) {
                              ^~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.cpp: In member function 'virtual void TwoWire::begin(uint8)':
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\Wire.cpp:88:27: warning: unused parameter 'self_addr' [-Wunused-parameter]
 void TwoWire::begin(uint8 self_addr) {
                           ^~~~~~~~~
"C:\\Users\\vadim\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -c -g -Os -Wall -Wextra -DDEBUG_LEVEL=DEBUG_ALL -std=gnu++11 -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8002000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10815 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DSERIAL_USB -DGENERIC_BOOTLOADER -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/stm32f1/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/stm32f1" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/usb_lib" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\cores\\maple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\SPI\\src" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\utility" "C:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire\\utility\\WireBase.cpp" -o "C:\\Users\\vadim\\AppData\\Local\\Temp\\arduino_build_290524\\libraries\\Wire\\utility\\WireBase.cpp.o"
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\utility\WireBase.h:44,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\Wire\utility\WireBase.cpp:41:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
Compiling library "SPI"
"C:\\Users\\vadim\\AppData\\Local\\Arduino15\\packages\\arduino\\tools\\arm-none-eabi-gcc\\7-2017q4/bin/arm-none-eabi-g++" -c -g -Os -Wall -Wextra -DDEBUG_LEVEL=DEBUG_ALL -std=gnu++11 -MMD -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -fno-use-cxa-atexit -DBOARD_generic_stm32f103c -DVECT_TAB_ADDR=0x8002000 -DERROR_LED_PORT=GPIOC -DERROR_LED_PIN=13 -mcpu=cortex-m3 -DF_CPU=72000000L -DARDUINO=10815 -DARDUINO_GENERIC_STM32F103C -DARDUINO_ARCH_STM32F1 -DSERIAL_USB -DGENERIC_BOOTLOADER -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ -DMCU_STM32F103C8 -mthumb -march=armv7-m -D__STM32F1__ "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/stm32f1/include" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/stm32f1" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\system/libmaple/usb/usb_lib" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\cores\\maple" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\variants\\generic_stm32f103c" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\Wire" "-IC:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\SPI\\src" "C:\\Program Files (x86)\\Arduino\\hardware\\Arduino_STM32-master\\STM32F1\\libraries\\SPI\\src\\SPI.cpp" -o "C:\\Users\\vadim\\AppData\\Local\\Temp\\arduino_build_290524\\libraries\\SPI\\SPI.cpp.o"
In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/wirish.h:70:0,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\SPI\src\SPI.h:47,
                 from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\libraries\SPI\src\SPI.cpp:32:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
Compiling core...

In file included from C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\variants\generic_stm32f103c\board.cpp:40:0:
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART1
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:188:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART2
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:191:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART3
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:194:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART4
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:197:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_UART5
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:200:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
 #if BOARD_HAVE_USART6
 ^~~~~~~~~~~~~~~~~~~
C:\Program Files (x86)\Arduino\hardware\Arduino_STM32-master\STM32F1\cores\maple/HardwareSerial.h:203:1: warning: this use of "defined" may not be portable [-Wexpansion-to-defined]